Image Manipulation Functions
This palette contains vis for manipulating image pixels
like.copy image, extract color plane, compose color plane, get/set pixel value,
get/set ROI and COI, image to and from array, fill image, flip image, also vis
for getting image information, etc.
Note: An vi icon with yellow background means they work on
color images. With gray background means they only work on single channel
image. With half yellow and half gray background means they work on both color
and single channel image. Others vi icon background are for either examples or
high level vis. For controls descriptions, you need to go to the vi in LabVIEW,
use help (ctrl+H) and move mouse over the controls to see them.
IVision_RetrieveImageInfo.vi
Outputs specified one or all of the created image informations and image
names.
Connector Pane
IVision_ImageToArray.vi
If ROI is set, only outputs data within the ROI. And only work for image
which has depth 8U for each channel(8U gray or 24bit color). For color image,
output array data is interleaved. The order is B,G,R,B,G,R...
Connector Pane
IVision_ArrayToImage.vi
Low level vi. Image.width has to be the multiple of 4.
Use for 8U gray or RGB image(24bit).
Connector Pane
IVision_CopyImage.vi
Copy the source image data to destination image. Both images must have the
same type and the same size.
ROI and COI fields are used. Mask must be a 8-bit single channel(gray)
image. Empty name for mask means mask is not used. Mask specifies elements of
destination image to be changed.
Connector Pane
IVision_Extract Color Plane.vi
Extract a color image. ROI is used if it's set. After this operation, the
input color image become a gray image as output.
Connector Pane
IVision_Compose Color Plane.vi
The source and destination images must have the same image size or ROI size
if ROI is set. Which means you can just replace a part of color image data at
the specified channel.
Connector Pane
IVision_FillImage.vi
Copies Fill Value to every selected element (by the mask) of the input
image. Can be use for multi-channel image.
ROI will be used if it's set, but COI must not be set.
Mask image and source image must have the same size. Mask image must be one
channel image.
Connector Pane
IVision_FlipImage.vi
Flip the source image horizontal, vertical or central and saved in
destination image. If destination image name is empty, the source image will be
used.
Connector Pane
IVision_GetImageCOI.vi
This vi gets the COI (channel of the interest) of the image.
Connector Pane
IVision_SetImageCOI.vi
The function sets the channel of interest to a given value. Value 0 means
that all channels are selected, 1 means that the first channel is selected etc.
Note that most of OpenCV functions do not support COI, so to process separate
image channel one may copy (through IVision_CopyImage.vi or IVision_Extract
Color Plane.vi) the channel to separate image, process it and copy the result
back (via IVision_CopyImage.vi or IVision_Compose Color Plane.vi) if need.
Connector Pane
IVision_GetImageROI.vi
This vi gets the ROI (region of the interest) of the image.
Connector Pane
IVision_SetImageROI.vi
This vi sets the ROI (region of interest) of an image. Once it's set, all
processing will only be done on the ROI.
Connector Pane
IVision_GetPixelValue_Color.vi
Get pixel value at specified XY coordinate. Work on multi channel image. For
gray image, "IVision_GetPixelValue_Gray.vi" is a little faster than
this one.
Connector Pane
IVision_SetPixelValue_Color.vi
Sets the pixel value at the specified XY coordinate. Work on multi channel
image. For gray image, "IVision_SetPixelValue_Gray.vi" is a little
faster than this one.
Connector Pane
IVision_GetPixelValue_Gray.vi
Get the pixel value at the specified XY coordinate.
Connector Pane
IVision_SetPixelValue_Gray.vi
Sets the pixel value at the specified XY coordinate. Works only on single
channel image.
Connector Pane
IVision_Image Manager.vi
Manager image opening, closing, adding... It's a high level vi.
Connector Pane
IVision_CopyImage_LowLevel.vi
ROI and COI fields are used. Both source and destination images must have
the same type, the same number of dimensions and the same size. Mask must be a
8-bit single channel image. Empty name for mask means mask is not used. This is
a low level vi.
Connector Pane
IVision_GetImageInfo.vi
Get image information. Low level vi.
Connector Pane
